Droplet Necking and Morphology Variations Induced by Changing the Gap Height During Transport in Digital Microfluidic Systems

作者：Yafia Mohamed^*; Najjaran Homayoun

来源：Journal of Microelectromechanical Systems, 2015, 24(5): 1647-1658.

DOI：10.1109/JMEMS.2015.2429553

• Digital microfluidics
• droplet necking
• droplet morphology
• numerical simulation

In this paper, we show that the droplet morphology varies significantly during the transport process in digital microfluidic (DMF) systems depending on the gap height between the top and bottom plates. The experimental results elucidate the effect of changing the gap height on the initiation and progression of droplet motion. For example, extreme necking is observed during transport from one electrode to another at low gap heights. In essence, this necking is unlike the previously reported necking occurring during the splitting process over three electrodes. Pronounced elongation of droplets at certain stages during the droplet motion was examined. The effect of changing the gap height on the droplet velocity profile is illustrated. We found that prolonged actuation time is needed to transport the droplet successfully at low gap heights. This paper entails detailed experimental and numerical characterization of droplet morphology to insinuate useful design and prototyping tips for enhanced DMF devices. Such deformation, elongation, and necking corroborate that the existing analytical models may be inadequate for certain gap heights as they typically assume a circular shape for the droplet during motion.

• 出版日期2015-10