Unified Model for Contact Angle Hysteresis on Heterogeneous and Superhydrophobic Surfaces

作者：Raj Rishi; Enright Ryan; Zhu Yangying; Adera Solomon; Wang Evelyn N^*

来源：Langmuir, 2012, 28(45): 15777-15788.

DOI：10.1021/la303070s

Understanding the complexities associated with contact line dynamics on chemically heterogeneous and super hydrophobic surfaces is important for a wide variety of engineering problems. Despite significant efforts to capture the behavior of a droplet on these surfaces over the past few decades, modeling of the complex dynamics at the three-phase contact line is needed. In this work, we demonstrate that contact line distortion on heterogeneous and superhydrophobic surfaces is the key aspect that needs to be accounted for in the dynamic droplet models. Contact line distortions were visualized and modeled using a thermodynamic approach to develop a unified model for contact angle hysteresis on chemically heterogeneous and superhydrophobic surfaces. On a surface comprised of discrete wetting defects on an interconnected less wetting area, the advancing contact angle was determined to be independent of the defects, while the relative fraction of the distorted contact line with respect to the baseline surface was shown to govern the receding contact angle. This behavior reversed when the relative wettability of the discrete defects and interconnected area was inverted. The developed model showed good agreement with the experimental advancing and receding contact angles, both at low and high solid fractions. The thermodynamic model was further extended to demonstrate its capability to capture droplet shape evolution during liquid addition and removal in our experiments and those in literature This study offers new insight extending the fundamental understanding of solid-liquid interactions required for design Of advanced functional coatings for microfluidics, biological, manufacturing, and heat transfer applications.

• 出版日期2012-11-13