科研之友
微信
新浪微博
Facebook
分享链接
摘要
Over the last decades, press hardening or hot forming has become all pervasive for automotive body-in-white design. Press-hardened boron-microalloyed steels are widely used in modern body structure for high safety standard and lightweight achievement. Considering the welding of press-hardened components, some special considerations have to be taken into account compared to conventional deep-drawing steel grades. The welding process results in a significant hardness drop in the heat-affected zone (HAZ) which may lead to a change in failure mode or premature failure. Furthermore, the mechanical properties of the welded joints are influenced by the weld metal hydrogen content. Hydrogen pickup of press-hardened steel may result from the heat treatment or the welding process. Due to the martensitic microstructure and the high strength level, a critical hydrogen content may cause hydrogen embrittlement or hydrogen-assisted cold cracking (HACC). This paper contributes to the determination of the diffusible hydrogen content in resistance spot-welded and gas metal arc-welded joints of press-hardened boron-microalloyed steel. It also promotes the understanding of the effect of diffusible hydrogen on the mechanical properties of those joints. Hydrogen was deliberately introduced during welding by wetting of the sheet surface with hydrogenated fluids. The hydrogen content in the weld metal was quantified by thermal desorption mass spectrometry (TDMS) technique. Finally, the influence on the mechanical properties of the welded joints was determined based on a simple component test. A GMA-welded component was set under a constant static load and evaluated for delayed hydrogen-assisted cracking.
- 出版日期2014-5
