Design of a Morphing Wingtip

作者：Cooper J E^*; Chekkal I; Cheung R C M; Wales C; Allen N J; Lawson S; Peace A J; Cook R; Standen P; Hancock S D; Carossa G M

来源：Journal of Aircraft, 2015, 52(5): 1394-1403.

DOI：10.2514/1.C032861

An initial design of a morphing wingtip for a regional jet aircraft is developed and evaluated. The adaptive wingtip concept is based upon a chiral-type internal structure, enabling controlled cant angle orientation, camber, and twist throughout the flight envelope. A baseline turbofan aircraft configuration model is used as the benchmark to assess the device. Computational fluid dynamics based aerodynamics are used to evaluate the required design configurations for the device at different points across the flight envelope in terms of lift/drag and bending moment distribution along the span, complemented by panel-method-based gust load computations. Detailed studies are performed to show how the chiral structure can facilitate the required shape changes in twist, camber, and cant. Actuator requirements and limitations are assessed, along with an evaluation of the aerodynamic gains from the inclusion of the device versus power and weight penalties. For a typical mission, it was found that savings of around 2% in fuel weight are possible using the morphing wingtip device. A similar reduction in weight due to passive gust load alleviation is also possible with a slight change of configuration.

• 出版日期2015-10