Numerical analysis of injection molding for the Syringe Barrel with optimum design and processing condition

作者：Chun Du Hwan^*

来源：Fibers and Polymers, 2017, 18(9): 1790-1795.

DOI：10.1007/s12221-017-7065-3

• Injection molding
• Filling analysis
• Gate location
• Temperature distribution
• Flow stress
• Warpage

The numerical analysis was performed to predict the potential problem, often occurring during the manufacturing process of the disposable medical device of a great volume. The cavity filling analyses were performed for the new design of the 3cc Syringe Barrel using polypropylene(PP1), and a new nucleated polypropylene(PP2) material for better clarity. These analyses have been performed for different processing conditions as well as various wall thickness designs for both materials. With the nucleated material, only the original wall thickness design has been studied at two different processing conditions for comparison purpose. This study was conducted to investigate the optimum part design and processing condition for two different materials. The most desirable design was selected with Design 3 for material utilization and reduced flow stresses by comparing the field results. The new nucleated polypropylene provided slightly better product quality and processing.

• 出版日期2017-9