科研之友
微信
新浪微博
Facebook
分享链接
摘要
This article describes how piezoelectric transducers embedded in the adhesive bond-line of lap-joints can be used to effectively monitor structural integrity. Various lap-joint coupons with embedded piezoelectric transducers were manufactured with and without artificial contamination at the bond-line and tested statically and cyclically. A novel scheme based on the electromechanical impedance response of the transducer was implemented to predict the failure of the tested lap-joint samples. The results from the mechanical testing indicated that monitoring the transducer's electromechanical impedance is an effective way of predicting the failure of the bond-line. Specifically for static tests, local damage to the bond-line was consistently detected at approximately 84% of the failure load for transducers located at the center of the bond-line, whereas for transducers embedded near the edge of the bond-line, the failure of the adhesive was detected at 60% of the failure load. Moreover, preliminary fatigue tests showed that significant changes in the electromechanical impedance signals were apparent starting at 60% of the life of the bond-line. In addition to the mechanical testing, the effectiveness of the proposed electromechanical impedance-based scheme was investigated by means of a three-dimensional finite element model corresponding to the specific coupon geometry tested and through a two-dimensional analytical solution.
- 出版日期2016-11
- 单位上海交通大学
