A quartz vibrating gyroscope interface circuit driven by sine-wave based on nonlinear multiplier

作者：Fu, Qiang; Yin, Liang^*; Di, Xinpeng; Chen, Weiping; Liu, Xiaowei

来源：IEICE Electronics Express, 2016, 13(19): 20160565.

DOI：10.1587/elex.13.20160565

• quartz vibrating gyroscope
• interface circuit
• multiplier
• high performance

A new simple interface circuit for quartz vibrating gyroscope (QVG) driven by sine-wave is presented in this paper. The interface circuit is composed of self-excited loop of driving circuit and detecting circuit. A new multiplier is designed to achieve the controlling to drive signal. The usage of new multiplier realizes the nonlinear adjustment to the amplitude of feedback drive signal. Consequently, the requirement of rapid oscillation, low harmonic and high stability is also achieved. The interface circuit is fabricated in a 0.5 mu m CMOS process and the test results show that the start time of drive signal is less than 2 ms. The drive signal frequency stability can reach to 0.084% (1-sigma) and the harmonic distortion is about 1.056%. The output noise of Quartz Vibrating Gyroscope is 0.00023 degrees/s/root Hz at 3Hz and non-linearity is about 107 ppm. The bandwidth is more than 60 Hz. Meanwhile, the short stability (1-sigma) is 2.1 degrees/hr, the angular random walk (ARW) and bias drift are 0.01388 degrees/root hr and 0.16 degrees/hr respectively.

• 出版日期2016-10-10
• 单位哈尔滨工业大学