Analytical Analytical study on reinforced concrete frames subject to compressive arch action

作者：Kang, Shao-Bo^*; Tan, Kang Hai

来源：Engineering Structures, 2017, 141: 373-385.

DOI：10.1016/j.engstruct.2017.03.039

• Compressive arch action
• Analytical model
• Column stiffness
• Joint shear
• Column flexural resistance

Reinforced concrete beams can resist applied vertical loads through the development of compressive arch action (CAA) when adequate horizontal restraints are provided at the ends. However, at the frame level, CAA tends to push adjoining columns outwards and may induce premature flexural or shear failure to the columns. Therefore, under CAA, flexural and shear resistances of the connecting columns need to be examined. This paper describes an analytical study on the behaviour of reinforced concrete frames subject to CAA. In the study, lateral and rotational stiffness of reinforced concrete columns is determined based on a rigid-plastic assumption. CAA of reinforced concrete frames is investigated through an analytical model, in which deformations of columns are taken into consideration. Besides, shear force and bending moment in the column are calculated from equilibrium to shed light on the possible failure mode of columns under CAA. Parametric studies are also conducted to investigate the dominant parameters on the behaviour of columns. Finally, recommendations are provided for the design of reinforced concrete columns against CAA in the connecting beam.

• 出版日期2017-6-15
• 单位重庆大学; 南阳理工学院