Application of pyrene-derived benzimidazole-linked polymers to CO2 separation under pressure and vacuum swing adsorption settings

作者：Sekizkardes Ali Kemal; Islamoglu Timur; Kahveci Zafer; El Kaderi Hani M^*

来源：Journal of Materials Chemistry A, 2014, 2(31): 12492-12500.

DOI：10.1039/c4ta01281j

Pyrene-derived benzimidazole-linked polymers (BILPs) have been prepared and evaluated for selective CO2 uptake and separation under pressure and vacuum swing conditions. Condensation of 1,3,6,8-tetrakis(4-formylphenyl) pyrene (TFPPy) with 2,3,6,7,10,11-hexaaminotriphenylene, 2,3,6,7,14,15 hexaaminotriptycene, and 3,3'-diaminobenzidine afforded BILP-11, BILP-12 and BILP-13, respectively, in good yields. BILP-12 exhibits the highest specific surface area (SA(BET) 1497 m(2) g(-1)) among all known BILPs and it also has very high CO2 uptake 5.06 mmol g(-1) at 273 K and 1.0 bar. Initial slope selectivity calculations indicate that BILP-11 has high selectivity for CO2/N-2 (103) and CO2/CH4 (11) at 273 K. IAST selectivity calculations of BILPs at 298 K also showed high CO2/N-2 (31-56) and CO2/CH4 (6.6-7.6) selectivity levels. The isosteric heats of adsorption for CO2 fall in the range of 32 to 36 kJ mol(-1) and were considerably higher than those of CH4 (16.1-21.7 kJ mol(-1)). More importantly, the performance of pyrene-based BILPs in CO2 removal from flue gas and methane-rich gases (natural gas and landfill gas) under different industrial conditions was investigated according to evaluation criteria suggested recently by Bae and Snurr. The outcome of this study revealed that BILPs are among the best known porous materials in the field; they exhibit high working capacity, regenerability, and sorbent selection parameters. Collectively, these properties coupled with the remarkable physicochemical stability of BILPs make this class of polymers very promising for CO2 separation applications.

• 出版日期2014