科研之友
微信
新浪微博
Facebook
分享链接
摘要
A new modified mix proportioning method for producing normal-strength concrete using recycled concrete aggregate, called the equivalent coarse aggregate mass (ECAM) method, is proposed in this paper. The basic concepts of the proposed method with calculations for mix design are presented by designing 14 mixes and testing 99 concrete samples (57 cubes and 42 cylinders). Experimental work was carried out in two phases. In the first phase, an experimental programme was conducted to verify the proposed mix design method by studying a single parameter - uniaxial compressive strength. Five different mixes with initial 0, 25, 50, 75 and 100 % replacement by mass were designed, cast and tested in this phase. It was concluded from the first phase that the proposed method can be adopted for designing the recycled concrete up to a nominal replacement ratio of 50 %. Accordingly, the second phase of experimental study was carried out to design three different grades of concrete strength using the proposed method to investigate the mechanical properties of the recycled concrete. Seven different mechanical properties - compressive strength, splitting tensile strength, modulus of elasticity, Schmidt hammer test, ultrasonic pulse velocity test, fresh density and hardened density - were investigated and are presented and discussed here.
- 出版日期2016-12
