科研之友
微信
新浪微博
Facebook
分享链接
摘要
A new method for slug-flow (segmented flow) characterization by means of ac electric sensing is proposed. Water segments regularly dispersed in kerosene are used as an experimental system. The sensing procedure is carried out in a plexiglass microchip with embedded gold microelectrodes. The presence of passing slugs over a measurement spot is determined from impedance variations. A square-shaped signal resulting from the slug flow is acquired and flow properties such as the mean velocity and length of the slugs are calculated. Complex behaviour of the corresponding electrochemical system is studied. Dependence of the impedance signal on the flow rate, ion concentration in the dispersed water slug and electric field strength are discussed and explained in detail. Advantages and disadvantages of the suggested method, in comparison with existing capacitive noncontact methods, are also clarified. Unlike the noncontact methods of electric sensing, with the insulation dielectric layer over the electrodes, our electrodes are in a direct contact with the carrier phase. The results show that the method is promising for process applications and will be further improved.
- 出版日期2014-1
