Mathematical model and characteristic analysis of hybrid photovoltaic/piezoelectric actuation mechanism

作者：Jiang, Jing^*; Li, Xiaonan; Ding, Jincheng; Yue, Honghao; Deng, Zongquan

来源：Smart Materials and Structures, 2016, 25(12): 125021.

DOI：10.1088/0964-1726/25/12/125021

• photonic control
• hybrid photovoltaic/piezoelectric actuation
• characteristic analysis

Photovoltaic materials can turn light energy into electric energy directly, and thus have the advantages of high electrical output voltages and the ability to realize remote or non-contact control. When high-energy ultraviolet light illuminates polarized PbLaZrTi (PLZT) materials, high photovoltages will be generated along the spontaneous polarization direction due to the photovoltaic effect. In this paper, a novel hybrid photovoltaic/piezoelectric actuation mechanism is proposed. PLZT ceramics are used as a photovoltaic generator to drive a piezoelectric actuator. A mathematical model is established to define the time history of the actuation voltage between two electrodes of the piezoelectric actuator, which is experimentally validated by the test results of a piezoelectric actuator with different geometrical parameters under irradiation at different light intensities. Some important characteristics of this novel actuation mechanism are analyzed and it can be concluded that (1) it is experimentally validated that there is no hysteresis between voltage and deformation which exists in a PLZT actuator; (2) the saturated voltage and response speed can be improved by using a multi-patch PLZT generator to drive the piezoelectric actuator; and (3) the initial voltage of the piezoelectric actuator can be acquired by controlling the logical switch between the PLZT and the piezoelectric actuator while the initial voltages increase with the rise of light intensity.

• 出版日期2016-12
• 单位哈尔滨工业大学