The use of low-energy SIMS (LE-SIMS) for nanoscale fuel cell material development

作者：Morris R J H^*; Fearn S; Perkins J; Kilner J; Dowsett M G; Beigalski M D; Rouleau C M

来源：Surface and Interface Analysis, 2011, 43(1-2): 635-638.

DOI：10.1002/sia.3526

• SIMS
• fuel cells
• nanoscale multilayers

Low-energy secondary ion mass spectrometry has been used to investigate the matrix structure and interface attributes of a novel Ce(0.85)Sm(0.15)O(2)/CeO(2) multilayer fuel cell material. Nanoscale oxide systems have shown enhanced ionic conductivities when produced to form highly oriented epitaxial structures. The Sm-doped CeO(2) material system is of particular interest for fuel cell technology because of its inherently high ionic conductivity at low operating temperatures (600-800 degrees C). For this study, a nanometer-scale Ce(0.85)Sm(0.15)O(2)/CeO(2) multilayer was grown by pulsed laser deposition. The sample was annealed at 700 degrees C in an oxygen ambience. High-resolution, low-energy depth profiling using Cs revealed some diffusion of the multilayer structure after annealing, along with a possible volume change for the Sm-doped layers. Changes in layer volume will lead to an increase in the mechanical strain and may cause the material to crack. The findings presented here suggest that the Ce(0.85)Sm(0.15)O(2)/CeO(2) multilayer structure in its current form may not possess the level of thermal stability required for use within a fuel cell environment.

• 出版日期2011-2