科研之友
微信
新浪微博
Facebook
分享链接
摘要
In this article the delamination phenomena, which occurs in the X70 steel during fracture process from the Charpy impact tests, was investigated. Microstructure, microtexture and Taylor factor map analyses were performed by scanning electron microscopy, light microscopy and electron backscatter diffraction, respectively. In a cross-section of two fractured surface regions namely, in the perpendicular and parallel regions to the propagation fracture direction where delamination occurred, it was possible to notice that delamination showed a key role in the anisotropy of impact toughness between the L-T and T-L orientations. The results also revealed that the cause of the delamination can be attributed to the presence of microstructural banding and elongated ferrite grains aligned in a rolling direction. The presence of (100)[011] and (111)[110] crystallographic orientations, with Taylor factors close to 2.7 and 4.5, respectively, were identified in the delamination region. They contribute to the occurrence of cleavage delamination during the fracture process.
- 出版日期2014-10
