Absorbing properties and structural design of microwave absorbers based on carbonyl iron and barium ferrite

作者：Feng Y B; Qiu T^*; Shen C Y

来源：Journal of Magnetism and Magnetic Materials, 2007, 318(1-2): 8-13.

DOI：10.1016/j.jmmm.2007.04.012

• microwave absorber
• carbonyl iron
• barium ferrite
• reflection loss
• permittivity
• permeability

Carbonyl iron and barium ferrite powder ( BaZn1.5Co0.5Fe16O27) were prepared in this work. The complex permittivity and permeability spectra for rubber radar absorbing materials employing carbonyl iron and barium ferrite powders were measured. A database describing the frequency dependence of the permittivities and permeabilities of the carbonyl iron and barium ferrite microwave absorbers with various powder percentage compositions in 2-18GHz was created. Based on the database, the single-layer and double-layer absorbers were designed and prepared, and their microwave absorption properties were investigated. The results indicate that the carbonyl iron powder prepared via thermal decomposition of iron pentacarbonyl is single cubic iron and of spherical shape. The barium ferrite powder is single W-type ferrite and a hexagonal flake. The absorption band of the double-layer microwave absorber is obviously more than that of the single-layer absorber. The double-layer microwave absorbers with reflection loss < - 13 dB over the range of <- 18GHz and re. ection loss < - 8 dB over the range of 2 - 18GHz were prepared. The thicknesses of the absorbers are only 3.6 and 3.7 mm, respectively.

• 出版日期2007-11
• 单位南京工业大学