Net Section Tension Capacity of Cold-Reduced Sheet Steel Channel Braces Bolted at the Web

作者：Teh Lip H^*; Gilbert Benoit P

来源：Journal of Structural Engineering, 2013, 139(5): 740-747.

DOI：10.1061/(ASCE)ST.1943-541X.0000650

• Bolted connections
• Cold-formed steel
• Shear lag
• Tensile strength
• Thin wall sections

This paper examines the accuracy of equations specified by the North American and Australasian steel structures codes for determining the net section tension capacity of a channel brace. It points out that there are three distinct factors affecting the net section efficiency of a cold-formed steel channel brace bolted at the web. These factors include (1) the in-plane shear lag associated with stress concentration around a bolt hole that is also present in flat sheets, (2) the out-of-plane shear lag that is also present in an I-section bolted at the flanges only, and (3) the bending moment arising from the connection eccentricity with respect to the neutral axis. Each of the relevant factors is explicitly incorporated into the equation proposed in this paper for determining the net section tension capacity of a cold-formed steel channel brace bolted at the web. The proposed equation is demonstrated through laboratory tests on low-ductility channel braces having practical aspect ratios that were bolted onto flexible plates, to be more reliable than the code equations and those existing in the literature. DOI: 10.1061/(ASCE)ST.1943541X.0000650.

• 出版日期2013-5