Healing simulation for bond strength prediction of FDM

作者：Coogan Timothy J^*; Kazmer David O

来源：Rapid Prototyping Journal, 2017, 23(3): 551-561.

DOI：10.1108/RPJ-03-2016-0051

• Simulation
• Thermoplastic polymers
• Bond strength
• Fused deposition modeling
• Thermal diffusion
• Healing

Purpose - The purpose of this paper is to present a diffusion-controlled healing model for predicting fused deposition modeling (FDM) bond strength between layers (z-axis strength).
Design/methodology/approach - Diffusion across layers of an FDM part was predicted based on a one-dimensional transient heat analysis of the interlayer interface using a temperature-dependent diffusion model determined from rheological data. Integrating the diffusion coefficient across the temperature history with respect to time provided the total diffusion used to predict the bond strength, which was compared to the measured bond strength of hollow acrylonitrile butadiene styr (ABS) boxes printed at various processing conditions.
Findings - The simulated bond strengths predicted the measured bond strengths with a coefficient of determination of 0.795. The total diffusion between FDM layers was shown to be a strong determinant of bond strength and can be similarly applied for other materials.
Research limitations/implications - Results and analysis from this paper should be used to accurately model and predict bond strength. Such models are useful for FDM part design and process control.
Originality/value - This paper is the first work that has predicted the amount of polymer diffusion that occurs across FDM layers during the printing process, using only rheological material properties and processing parameters.

• 出版日期2017