Multiband Printed Loop Mobile Phone Antenna for LTE/WWAN/GNSS Application

作者：Xu, Yuan; Zhou, Hao-Miao^*

来源：International Journal of Antennas and Propagation, 2016, 2016: 1671273.

DOI：10.1155/2016/1671273

• MONOPOLE ANTENNA

A multiband printed loop mobile phone antenna for LTE/WWAN/GNSS application is presented. It covers seven communication bands (VSWR < 3) and GNSS band (VSWR < 1.5). The so-called GNSS (global navigation satellite system) band includes COMPASS, GALILEO, GPS, and GLONASS. From the analysis of the structure, the coupled-fed antenna mainly consists of three parts: the feeding strip, shorted strip, and U-shaped parasitic coupling strip. The proposed antenna works in three resonant modes, respectively, at 860 MHz (0.25 lambda), 1620 MHz (0.5 lambda), and 2620 MHz (1 lambda). A solution is provided, by which the navigation antenna can be integrated into the communication main antenna to save space. The antenna not only can work in GSM850/900/1800/1900/UMTS2100/LTE2300/2500 bands but also covers the world's four major navigation systems. Moreover, the proposed antenna can be easily printed on the circuit board without loading any lumped element and only occupies a small volume of 18 x 32 x 3 mm(3), which is suitable for smartphone application. In addition, the redundant design of multinavigation system is quite favorable for the elimination of errors or shadow area caused by single navigation system, especially for outdoor investigation, national security, and so on.

• 出版日期2016
• 单位中国计量大学