A correction scheme for thermal conductivity measurement using the comparative cut-bar technique based on 3D numerical simulation

作者：Xing Changhu^*; Folsom Charles; Jensen Colby; Ban Heng; Marshall Douglas W

来源：Measurement Science and Technology, 2014, 25(5): 055602.

DOI：10.1088/0957-0233/25/5/055602

• thermal conductivity
• guarded cut-bar technique
• experimental measurement
• numerical simulation
• correction scheme

As an important factor affecting the accuracy of thermal conductivity measurement, systematic (bias) error in the guarded comparative axial heat flow (cut- bar) method was mostly neglected by previous researches. This bias is primarily due to the thermal conductivity mismatch between sample and meter bars (reference), which is common for a sample of unknown thermal conductivity. A correction scheme, based on finite element simulation of the measurement system, was proposed to reduce the magnitude of the overall measurement uncertainty. This scheme was experimentally validated by applying corrections on four types of sample measurements in which the specimen thermal conductivity is much smaller, slightly smaller, equal and much larger than that of the meter bar. As an alternative to the optimum guarding technique proposed before, the correction scheme can be used to minimize the uncertainty contribution from the measurement system with non- optimal guarding conditions. It is especially necessary for large thermal conductivity mismatches between sample and meter bars.

• 出版日期2014-5