Analysis and evaluation of objective functions in kinematic calibration of parallel mechanisms

作者：Majarena A C^*; Santolaria J; Samper D; Aguilar J J

来源：International Journal of Advanced Manufacturing Technology, 2013, 66(5-8): 751-761.

DOI：10.1007/s00170-012-4363-1

• Parallel kinematics
• Objective function
• Geometric parameter identification
• Deviations in measurement
• External calibration

This paper analyses different objective functions for the parameter identification of parallel mechanisms and studies the influence in the position and orientation errors to improve their accuracy. A new objective function considering deviation terms is presented. This function is compared with other widely used functions and the advantages and disadvantages of each function are presented. The geometric parameter identification is performed by external calibration by means of the direct kinematic model. First, the objective functions are defined considering error position, error orientation and deviations in measurement. These functions compare the measured and calculated moving platform coordinates in order to obtain the identified model parameters that minimize this difference. The measured coordinates are obtained by measuring three sphere centres, fixed to the moving platform of a parallel mechanism, and the computed coordinates are given by the kinematic model. Second, the model is solved by the Levenberg-Marquardt algorithm for a number of identification positions. Finally, the calibration is verified in test positions. The results obtained show that the consideration of the deviations in measurement in the objective function with respect to classical approaches allows us to better identify those kinematic parameters corresponding with passive joints that cannot be measured. These findings confirm that a suitable objective function can improve the mechanism accuracy by more than one order of magnitude in both position and orientation errors.

• 出版日期2013-5