科研之友
微信
新浪微博
Facebook
分享链接
摘要
In this work, we propose an ensemble 4D-seismic history-matching framework for reservoir characterization. Compared with similar existing frameworks in the reservoir-engineering community, the proposed one consists of some relatively new ingredients, in terms of the type of seismic data in choice, wavelet multiresolution analysis for the chosen seismic-data and related-data noise estimation, and the use of recently developed iterative ensemble history-matching algorithms. Typical seismic data used for history matching, such as acoustic impedance, are inverted quantities, whereas extra uncertainties may arise during the inversion processes. In the proposed framework, we avoid such intermediate inversion processes. In addition, we also adopt wavelet-based sparse representation to reduce data size. Concretely, we use intercept and gradient attributes derived from amplitude vs. angle (AVA) data, apply multilevel discrete wavelet transforms (DWTs) to attribute data, and estimate noise level of resulting wavelet coefficients. We then select the wavelet coefficients above a certain threshold value, and history match these leading wavelet coefficients with an iterative ensemble smoother (iES). As a proof-of-concept study, we apply the proposed framework to a 2D synthetic case originated from a 3D Norne field model. The reservoir-model variables to be estimated are permeability (PERMX) and porosity (PORO) at each active gridblock. A rock-physics model is used to calculate seismic parameters (velocity and density) from reservoir properties (porosity, fluid saturation, and pressure); then, reflection coefficients are generated with a linearized AVA equation that involves velocity and density. AVA data are obtained by computing the convolution between reflection coefficients and a Ricker wavelet function. The multiresolution analysis applied to the AVA attributes helps to obtain a good estimation of noise level and substantially reduce the data size. We compare history-matching performance in three scenarios: (S1) with production data only, (S2) with seismic data only, and (S3) with both production and seismic data. In either Scenario S2 or Scenario S3, we also inspect two sets of experiments, one with the original seismic data (full-data experiment) and the other adopting sparse representation (sparse-data experiment). Our numerical results suggest that, in this particular case study, the use of production data largely improves the estimation of permeability, but has little effect on the estimation of porosity. Using seismic data only improves the estimation of porosity, but not that of permeability. In contrast, using both production and 4D-seismic data improves the estimation accuracies of both porosity and permeability. Moreover, in either Scenario S2 or Scenario S3, provided that a certain stopping criterion is equipped in the iES, adopting sparse representation results in better history-matching performance than using the original data set.
- 出版日期2017-6
