Numerical simulation of the delay arming process of initiating explosive brakes

作者：Wang Ru; Wang Yabin

来源：Journal of Beijing Institute of Technology, 2015, 24(1): 4-7.

DOI：10.15918/j.jbit1004-0579.201524.0102

• ALE
• Delay arming
• Initiating explosive brakes
• Numerical simulation

The delay arming process of initiating explosive (IE) brakes for fuse is complex and hard to be verified. A numerical simulation model of IE brakes was established based on the arbitrary Lagrange-Euler method. The model included the structure, the air filed, etc. The simulation boundary conditions were defined, including the contacts, blasting parameters of the explosive and the fluid-solid coupling interface. The simulation results show that the shear pin of the chosen IE can be cut off. When the piston needs to move 0.8 cm, the time set to the delay arming of the IE brakes model is about 40 μs. The maximum displacement of the piston is 1.17 cm. The model provides basis for parameters design and further improvement of IE brakes.

• 出版日期2015
• 单位北京理工大学