科研之友
微信
新浪微博
Facebook
分享链接
摘要
A numerical model based on a boundary element method (BEM) is developed to predict the performance of two-body self-reacting floating-point absorber (SRFPA) wave energy systems that operate predominantly in heave. The key numerical issues in applying the BEM are systematically discussed. In particular, some improvements and simplifications in the numerical scheme are developed to evaluate the free surface Green's function, which is a main element of difficulty in the BEM. For a locked SRFPA system, the present method is compared with the existing experiment and the Reynolds-averaged Navier-Stokes (RANS)-based method, where it is shown that the inviscid assumption leads to substantial over-prediction of the heave response. For the unlocked SRFPA model we study in this paper, the additional viscous damping primarily induced by flow separation and vortex shedding, is modelled as a quadratic drag force, which is proportional to the square of body velocity. The inclusion of viscous drag in present method significantly improves the prediction of the heave responses and the power absorption performance of the SRFPA system, obtaining results excellent agreement with experimental data and the RANS simulation results over a broad range of incident wave periods, except near resonance in larger wave height scenarios. It is found that the wave overtopping and the re-entering impact of out-of-water floating body are observed more frequently in larger waves, where these non-linear effects are the dominant damping sources and could significantly reduce the power output and the motion responses of the SRFPA system.
- 出版日期2018-12
- 单位上海交通大学
