Morphology of Nonmetallic-inclusion Clusters Observed in Molten Metal by X-ray Micro-CT

作者：Li Tao; Shimasaki Shin ichi^*; Taniguchi Shoji; Uesugi Kentaro; Narita Shunsuke

来源：Journal of the Iron and Steel Institute of Japan, 2015, 101(2): 148-157.

DOI：10.2355/tetsutohagane.101.148

• inclusion coagulation
• three-dimensional analysis
• morphology of cluster
• two-dimensional cluster
• X-ray micro-CT

The removal of non-metallic inclusions in the metallurgical process greatly affects the properties of the final products. The structure of inclusion clusters plays a key role in inclusion behaviors of their removal process, such as coagulation, flotation and bubble adhesion. However, it is rare to find reports quantitatively investigating the morphology of inclusion clusters in metal system. On the other hand, to quantitatively estimate the inclusion clusters in metal, it is required to distinguish clusters on two-dimensional (2D) cross-sectional images of the as-polished samples. In this study, TiB2 particle clusters were prepared in a mechanically agitated crucible containing molten Al at 1073 K. The samples of Al-TiB2 were measured by X-ray micro-computed tomography (micro-CT) to obtain the three-dimensional (3D) information of TiB2 particles and clusters in solid Al. The images of 3D particle clusters in solid Al were extracted and reconstructed by self-developed programs. A series of parameters were defined to describe the 3D characteristics of clusters and their 2D cross-sections. The effects of agitation time and speed on the cluster structure were investigated. A program was developed to distinguish clusters in 2D cross-sections through the use of the 3D cluster information (DC-2D-3D) obtained from X-ray micro-CT.

• 出版日期2015