Mechanical and tribological properties of short-fiber-reinforced SiC composites

作者：Tang, Hanling; Zeng, Xierong^*; Xiong, Xinbo; Li, Long; Zou, Jizhao

来源：Tribology International, 2009, 42(6): 823-827.

DOI：10.1016/j.triboint.2008.10.017

• Short-carbon-fiber-reinforced SiC composite
• Friction coefficient
• Wear rate

The short-carbon-fiber-reinforced SiC (C-sf/SiC) composites were prepared by hot-pressing sintering with Si, Al and B as sintering additives. The effects of fiber volume fraction on the mechanical and tribological properties of the C-sf/SiC composites were investigated. The results show that the bending strength values of the composites containing a certain content of the short carbon fibers are higher than that of the monolithic SiC. The friction coefficients of the composites decrease with increasing short cat-boil fibers content. Except of the composite containing 53 vol% short carbon fibers, the wear rates of the composites decrease with increasing short carbon fibers content. and are lower than that of the monolithic SiC drastically.

• 出版日期2009-6
• 单位西北工业大学; 深圳大学