Analysis of grinding mechanics and improved predictive force model based on material-removal and plastic-stacking mechanisms

作者：Zhang, Yanbin; Li, Changhe^*; Ji, Heju; Yang, Xiaohui; Yang, Min; Jia, Dongzhou; Zhang, Xianpeng; Li, Runze; Wang, Jun^*

来源：International Journal of Machine Tools and Manufacture, 2017, 122: 81-97.

DOI：10.1016/j.ijmachtools.2017.06.002

• Grinding force model
• Material removal
• Plastic stacking
• Dynamic active grains
• Scratch test
• Minimum quantity lubrication

Numerous researchers have developed theoretical and experimental approaches to force prediction in surface grinding under dry conditions. Nevertheless, the combined effect of material removal and plastic stacking on grinding force model has not been investigated. In addition, predominant lubricating conditions, such as flood, minimum quantity lubrication, and nanofluid minimum quantity lubrication, have not been considered in existing force models. This work presents an improved theoretical force model that considers material-removal and plastic-stacking mechanisms. Grain states, including cutting and ploughing, are determined by cutting efficiency (beta). The influence of lubricating conditions is also considered in the proposed force model. Simulation is performed to obtain the cutting depth (a(g)) of each "dynamic active grain." Parameter beta is introduced to represent the plastic-stacking rate and determine the force algorithms of each grain. The aggregate force is derived through the synthesis of each single-grain force. Finally, pilot experiments are conducted to test the theoretical model. Findings show that the model's predictions are consistent with the experimental results, with average errors of 4.19% and 4.31% for the normal and tangential force components, respectively.

• 出版日期2017-11
• 单位青岛理工大学