Size effects in the conical indentation of an elasto-plastic solid

作者：Danas K; Deshpande V S; Fleck N A^*

来源：Journal of the Mechanics and Physics of Solids, 2012, 60(9): 1605-1625.

DOI：10.1016/j.jmps.2012.05.002

• Strain-gradient plasticity
• Indentation
• Mixed finite-element method
• Material length-scales
• Elastic-viscoplastic material

The size effect in conical indentation of an elasto-plastic solid is predicted via the Fleck and Willis formulation of strain gradient plasticity (Fleck, N.A. and Willis, J.R., 2009, A mathematical basis for strain gradient plasticity theory. Part II: tensorial plastic multiplier, J. Mech. Phys. Solids, 57, 1045-1057). The rate-dependent formulation is implemented numerically and the full-field indentation problem is analyzed via finite element calculations, for both ideally plastic behavior and dissipative hardening. The isotropic strain-gradient theory involves three material length scales, and the relative significance of these length scales upon the degree of size effect is assessed. Indentation maps are generated to summarize the sensitivity of indentation hardness to indent size, indenter geometry and material properties (such as yield strain and strain hardening index). The finite element model is also used to evaluate the pertinence of the Johnson cavity expansion model and of the Nix-Gao model, which have been extensively used to predict size effects in indentation hardness.

• 出版日期2012-9