Microstructural characterization and strengthening mechanisms of a 12Cr-ODS steel

作者：Shen, Jingjie^*; Li, Yanfen^*; Li, Feng; Yang, Huilong; Zhao, Zishou; Kano, Sho; Matsukawa, Yoshitaka; Satoh, Yuhki; Abe, Hiroaki

来源：Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2016, 673: 624-632.

DOI：10.1016/j.msea.2016.07.030

• Oxide dispersion strengthened steels
• Microstructure
• Nm-scale oxide particles
• HRTEM
• Strengthening mechanisms

The microstructure of the 12Cr-ODS steel was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electron bacicscatter diffraction (EBSD) techniques. The results showed that the microstructure consisted of fine and elongated grains, high density of dislocations, and large concentration of nm-scale oxide particles, which were identified as five types of crystal structures by high resolution TEM (HRTEM) imaging, such as monoclinic and cubic Y2O3, hexagonal and orthorhombic Y2TiO5, and cubic Y2Ti2O7. The dominant (001) <110> component and weaker <111> parallel to normal direction texture were observed. Besides, the yield stress was experimentally measured and quantitatively estimated. The findings indicated that theoretical calculation was in accordance with the experimental measurements, and strengthening contributions from solid solution atoms and grain boundaries were linearly additive, whereas those from dislocations and oxide dispersoids were averaged by root mean square summation.

• 出版日期2016-9-15