Numerical simulation and experimental study on the non-axisymmetric die-less shear spinning

作者：Jia, Z.; Han, Z. R.^*; Liu, B. M.; Fan, Z. J.

来源：International Journal of Advanced Manufacturing Technology, 2017, 92(1-4): 497-504.

DOI：10.1007/s00170-017-0172-x

• Non-axisymmetric spinning
• Die-less
• Fem
• Half cone angle

The non-axisymmetric cone has broad application prospects and is feasible to be manufactured via die-less shear spinning process which however lacks of research. With the roller path equation and other boundary conditions, the finite element model for non-axisymmetric die-less shear spinning process is established and simulated by adopting ABAQUS/explicit software in this study. The FEM results are experimentally verified by comparing the morphology and the HCAs. The distribution of stress and strain in different working conditions and the ellipticity and the elongation of the material in different spinning process during non-axisymmetric die-less shear spinning process are analyzed. It shows that the 0A degrees area of the flange is the position where the wrinkle occurs easily, and the elongation of the material reaches the maximum value; the larger equivalent stress and strain distribute on the conical surface with the smaller HCA. With the movement of the roller, the ellipticity of the cross section increases in the bigger HCA working conditions, but decreases in the smaller HCA working conditions due to the combined effects of the deformation and the springback.

• 出版日期2017-9
• 单位沈阳航空航天大学