Application of an advanced eddy-current loss modelling to magnetic properties of electrical steel laminations in a wide range of measurements

作者：Hamzehbahmani Hamed^*; Anderson Philip; Preece Simon

来源：IET Science Measurement & Technology, 2015, 9(7): 807-816.

DOI：10.1049/iet-smt.2014.0276

• iron alloys
• silicon alloys
• eddy current losses
• laminations
• skin effect
• magnetisation
• magnetic permeability
• magnetic cores
• eddy-current loss modelling
• magnetic properties
• electrical steel laminations
• skin effect
• nonuniform flux density distribution
• complex relative permeability
• magnetisation
• grain oriented silicon steel

This study investigates the influence of a wide range of magnetising frequencies and peak flux densities on the magnetic properties of the electrical steels. In the relevant studies some important factors and operational properties, for example, skin effect, non-uniform flux density distribution, complex relative permeability and magnetisation characteristic of the material, which are often neglected in the literature, are highlighted. Analytical modelling and experimental works were performed for 3% grain oriented silicon steel. In order to show the impact of peak flux density on the magnetic properties, two peak flux densities 1.3 T as a high permeability point and 1.7 T as a low permeability point were considered. The results highlighted that magnetising frequency and peak flux density are two determinant factors with significant effect on the magnetic properties of electrical steels.

• 出版日期2015-10