A Two-layer Model for the Simulation of the VARTM Process with Resin Distribution Layer

作者：Young Wen Bin^*

来源：Applied Composite Materials, 2013, 20(6): 1305-1319.

DOI：10.1007/s10443-013-9336-5

• Resin transfer moulding (RTM)
• Resin flow
• Numerical analysis

Vacuum assisted resin transfer molding (VARTM) is one of the important processes to fabricate high performance composites. In this process, resin is drawn into the mold to impregnate the fiber reinforcement to a form composite. A resin distribution layer with high permeability was often introduced on top of the fiber reinforcement to accelerate the filling speed. Due to the difference of the flow resistance in the resin distribution layer and the reinforcement as well as the resulting through thickness transverse flow, the filling flow field is intrinsically three-dimensional. This study developed a two-layer model with two-dimensional formulation to simulate the filling flow of the VARTM process with a resin distribution layer. Two-dimensional flow was considered in each layer and a transverse flow in the thickness direction was estimated between the two layers. Thermal analysis including the transverse convection was also performed to better simulate the temperature distribution.

• 出版日期2013-12