Determination of RW3-to-water mass-energy absorption coefficient ratio for absolute dosimetry

作者：Seet Katrina Y T^*; Hanlon Peta M; Charles Paul H

来源：Australasian Physical & Engineering Sciences in Medicine, 2011, 34(4): 553-558.

DOI：10.1007/s13246-011-0102-4

• Dosimetry
• Solid phantom
• Plastic water
• RW3

The measurement of absorbed dose to water in a solid-phantom may require a conversion factor because it may not be radiologically equivalent to water. One phantom developed for the use of dosimetry is a solid water, RW3 white-polystyrene material by IBA. This has a lower mass-energy absorption coefficient than water due to high bremsstrahlung yield, which affects the accuracy of absolute dosimetry measurements. In this paper, we demonstrate the calculation of mass-energy absorption coefficient ratios, relative to water, from measurements in plastic water and RW3 with an Elekta Synergy linear accelerator (6 and 10 MV photon beams) as well as Monte Carlo modeling in BEAMnrc and DOSXYZnrc. From this, the solid-phantom-to-water correction factor was determined for plastic water and RW3.

• 出版日期2011-12