科研之友
微信
新浪微博
Facebook
分享链接
摘要
An experimental study was conducted to evaluate the compressive behavior of damaged circular hollow section (CHS) steel columns repaired by carbon fiber-reinforced polymer (CFRP) or high-strength grout. A total of 22 specimens, including bare steel specimens, CFRP repaired specimens and grout repaired specimens were tested under axial compression loading. The design parameters are the amount of loss in wall thickness, extent of damage along tube height, and the damage angle around the circumference. Two promising retrofit techniques, external wrapping of CFRP and grouted jacket, were adopted here. The repairing efficiency was assessed in terms of the above-mentioned retrofit techniques and design parameters. A finite element (FE) analysis was also performed and analyzed with test results. The failure modes are presented together with load-shortening and load-strain behavior of specimens. The results indicate that the behavior of damaged CHS steel columns can be effectively rehabilitated by either CFRP or grout jacketing. The local buckling of the internal steel tube was either delayed by fibers or suppressed by the surrounding grout, leading to an improvement both in compressive strength and deformation capacity. It was also found that grouted jacket repair generally shows an overwhelming strength enhancement over the CFRP wrapping method except for specimens with 90 damage around circumference, which shows a delay of the restraining effect. A parametric study was eventually undertaken to fully understand the influences of design parameters on columns' compressive characteristics.
- 出版日期2017-10
- 单位同济大学
