科研之友
微信
新浪微博
Facebook
分享链接
摘要
The paper presents an experimental investigation of the thermoacoustic oscillations detection in a lean premixed pre-evaporation (LPP) combustor using acoustic signals. The LPP model combustion chamber oscillation combustion test platform was designed and built; the thermal parameters signal, the acoustic signal, and the dynamic pressure signal were collected under the steady condition and the transition condition, and been analyzed comparatively. The experimental result shows that, at the same inlet air speed, the dominant frequency of the combustion chamber is proportional to the thermal load, while at the same fuel flow, the main frequency of the combustion chamber does not change with the changing of air speed. In addition, the doubling frequency of the acoustic signal is more obvious than the pressure signals, which show that the interference of the acoustic signal is less. In the transition condition, the pulse energy of the acoustic signal is obviously increased after ignition. The dominant frequency energy increases when the working condition begins to change in the stable to oscillation combustion condition. The dominant frequency energy decreases when the working condition begins to change in the oscillation to stable combustion condition. During the flameout condition, the oscillating energy begins to decay from the high frequency region. For the acoustic signal is less disturbed than the pressure signal and it can obtain the same result with the pressure signal in the oscillation condition and the transition condition, acoustic diagnostic is an auxiliary method for combustion oscillation in LPP combustor.
- 出版日期2018-12
- 单位上海交通大学
