Actuation Behavior of Polylactic Acid Fiber Films Prepared by Electrospinning

作者：Nobeshima Taiki; Ishii Yuya; Sakai Heisuke; Uemura Sei; Yoshida Manabu

来源：Journal of Nanoscience and Nanotechnology, 2016, 16(4): 3343-3348.

DOI：10.1166/jnn.2016.12296

• Nano Fiber
• Electrospinning
• Biodegradable Material
• Piezoelectric Polymer
• Actuator
• Flexible Device
• Wearable Device

A poly-DL-lactide (PLA) fiber film was prepared using the electrospinning method. This film consisted of randomly oriented PLA nanofibers. Consequently, it had sponge-like structure and was quite soft compared to PLA films prepared by spin coating. The average diameter of the fibers and the density of the film were 730 nm and 20%, respectively. By applying a voltage, the PLA film was subjected to electric-field-induced strain: expansion and compression in the thickness direction. When a voltage of -200 V was applied to the film, its thickness shrank from 13.5 mu m to 10.0 mu m (a 26% reduction). Electric-field-induced strain can occur via two different mechanisms: The first is electrostrictive behavior. That is, in a highly electric field region, a change of film thickness occurs (compression only) from the electrostatic force between electrodes. The second mechanism is piezoelectric-like behavior that occurs in racemic PLA, wherein a PLA nanofiber is expanded and compressed by applying positive and negative voltage. Such piezoelectric-like behavior was not observed in spin-coated PLA films.

• 出版日期2016-4