A novel tool to standardize rheology testing of molten polymers for pharmaceutical applications

作者：Treffer Daniel; Troiss Alexander; Khinast Johannes

来源：International Journal of Pharmaceutics, 2015, 495(1): 474-481.

DOI：10.1016/j.ijpharm.2015.09.001

• Sample preparation
• Pharmaceutical polymer processing
• Melt rheology
• Reproducibility
• Compression moldings

Melt rheology provides information about material properties that are of great importance for equipment design and simulations, especially for novel pharmaceutical manufacturing operations, including extrusion, injection molding or 3d printing. To that end, homogeneous samples must be prepared, most commonly via compression or injection molding, both of which require costly equipment and might not be applicable for shear-and heat-sensitive pharmaceutical materials.
Our study introduces a novel vacuum compression molding (VCM) tool for simple preparation of thermoplastic specimens using standard laboratory equipment: a hot plate and a vacuum source. Sticking is eliminated by applying polytetrafluoroethylene (PTFE) coated separation foils. The evacuation of the tool leads to compression of the sample chamber, which is cost-efficient compared to conventional methods, such as compression molding or injection molding that require special equipment. In addition, this compact design reduces the preparation time and the heat load.
The VCM tool was used to prepare samples for a rheological study of three pharmaceutical polymers (Soluplus (R), Eudragit (R) E, EVA Rowalit (R) 300-1/28). The prepared samples were without any air inclusions or voids, and the measurements had a high reproducibility. All relative standard deviations were below 3%. The obtained data were fitted to the Carreau-Yasuda model and time-temperature superposition was applied.

• 出版日期2015-11-10