Nanoscale Zr-containing precipitates; a solution for significant improvement of high-temperature strength in Al-Si-Cu-Mg alloys

作者：Rahimian, Mehdi; Amirkhanlou, Sajjad; Blake, Paul; Ji, Shouxun^*

来源：Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2018, 721: 328-338.

DOI：10.1016/j.msea.2018.02.060

• Aluminium alloys
• Microstructure
• Mechanical properties
• Heat treatment
• Phase transition
• Precipitation strengthening

This work aims to reveal the valuable role of Zr in cast Al-Si-Cu-Mg alloys utilised at elevated temperatures. The Al7Si2Cu0.2Zr alloy, subjected to well-tuned heat treatment process, was benchmarked against the conventional Al7Si0.5Cu alloy. Microstructural investigation showed that the main strengthening phases in the Al7Si2Cu0.2Zr alloy are theta', Q' and Al-Si-Zr-Ti precipitates. Al-Si-Zr-Ti precipitates with the size of 80-200 nm are formed during solutionising at 530 degrees C, which can be considered as the first ageing step. Other two Cu-containing precipitates (theta' and Q') at the size of 20 nm are formed during ageing (170 degrees C). Nano-sized Zr-containing precipitates are mostly exhibited elliptical morphology with coherent/semi-coherent interfaces with the alpha-Al matrix, making them more stable at elevated temperatures. As a result, the yield strength is improved at room temperature from 261 to 291 MPa, and the ultimate tensile strength (UTS) is improved from 282 to 335 MPa for the Al7Si2Cu0.2Zr alloy, compared with the Al7Si0.5Cu alloy. Moreover, the mechanical properties are significantly improved at elevated temperatures. The yield strength and UTS at 200 degrees C are 177 and 186 MPa, respectively, for the Al7Si0.5Cu alloy. But these are 224 and 246 MPa, respectively, for the Al7Si2Cu0.2Zr alloy. The improvement of mechanical properties at elevated temperatures is mainly attributed to the refined microstructure and the precipitation of strengthening phases containing slow-diffused Zr element to retard the precipitation coarsening. Furthermore, the addition of Cu changes the precipitates from theta' and beta '' in the Al7Si0.5Cu alloy to theta' and Q' in the Al7Si2Cu0.2Zr alloy which, in turn, induce a complementary effect on the improvement of mechanical properties.

• 出版日期2018-4-4