科研之友
微信
新浪微博
Facebook
分享链接
摘要
A novel multi-scale domain overlapping coupling methodology designed to couple a computational fluid dynamics (CFD) code with a system thermal hydraulic (STH) code was developed and its performance was investigated. The methodology has been implemented in the coupling infrastructure code Janus, developed at the University of Michigan, providing methods for the on-the-fly data transfer through memory between the commercial CFD code STAR-CCM+ and the US NRC best-estimate thermal hydraulic system code TRACE. Coupling between these two software packages is motivated by the desire to extend the range of applicability of TRACE to scenarios in which local momentum and energy transfer are important, such as three-dimensional mixing of localized slugs of deborated or cold water in the downcomer and lower plenum of a reactor pressure vessel. The intra-fluid shear forces necessary to correctly capture these effects are neglected in the TRACE equations of motion, but are readily calculated from CFD solutions. CFD/STH coupling implementations therefore have applications in reactor transients such as boron dilution scenarios, Anticipated Transient Without SCRAM (ATWS) and Main Steam Line Break (MSLB). The proposed method is based on aliasing all spatial sources and sinks of momentum in the CFD domain as frictional losses in the system code domain. The internal velocity fields and, consequently, the inertial component of the pressure field are maintained consistent between the CFD and STH domains through a complementary velocity-matching interface. In this paper, coupled simulations are performed on Cartesian and cylindrical geometry with emphasis on consistency, convergence, and stability during transient scenarios. Results show that the presented domain overlapping coupling method is capable of adjusting pressure and velocity profiles of multi-dimensional system code solutions to match CFD solutions accurately. Important characteristics of transient simulations were found to include the background flow rate, specifically the stabilizing effect of viscous forces, as well as the time derivative of the flow rate. Under certain adverse conditions, the basic coupling method is found to produce unstable behavior. A stabilization method for adjusting CFD data is laid out and found to significantly improve the method's performance under the most challenging conditions. Recommendations are laid out for further improving the coupling via advanced time stepping methods.
- 出版日期2017-7
