科研之友
微信
新浪微博
Facebook
分享链接
摘要
The microstructural evolution and the adhesion of an Ag nanopaste screen-printed on a silicon substrate were investigated as a function of sintering temperature. Through the two thermal analysis methods, such as differential scanning calorimeter and thermo-gravimetric analysis, the sintering conditions were defined where the temperature was raised from 150A degrees C to 300A degrees C, all with a fixed sintering time of 30 min. The microstructure and the volume of the printed Ag nanopaste were observed using a field emission scanning electron microscope and a 3-D surface profiler, respectively. The apparent density of the printed Ag nanopaste was calculated depending on the sintering conditions, and the adhesion was evaluated by a scratch test. As the sintering temperature increased from 150A degrees C to 300A degrees C, the apparent density and the adhesion increased by 22.7% and 43%, respectively. It is confirmed that the printed Ag nanopaste sintered at higher temperatures showed higher apparent density in the microstructural evolution and void aggregation, resulting in the lower electrical resistivity and various scratched fractures.
- 出版日期2012-1-5
