A general thermal model of machine tool spindle

作者：Dong, Yanfang^*; Zhou, Zude; Liu, Mingyao

来源：Advances in Mechanical Engineering, 2017, 9(1): 1687814016686309.

DOI：10.1177/1687814016686309

• Machine tool
• spindle
• thermal model
• bearing
• heat generation

As the core component of machine tool, the thermal characteristics of the spindle have a significant influence on machine tool running status. Lack of an accurate model of the spindle system, particularly the model of load-deformation coefficient between the bearing rolling elements and rings, severely limits the thermal error analytic precision of the spindle. In this article, bearing internal loads, especially the function relationships between the principal curvature difference F(rho) and auxiliary parameter n(delta), semi-major axis a, and semi-minor axis b, have been determined; furthermore, high-precision heat generation combining the heat sinks in the spindle system is calculated; finally, an accurate thermal model of the spindle was established. Moreover, a conventional spindle with embedded fiber Bragg grating temperature sensors has been developed. By comparing the experiment results with simulation, it indicates that the model has good accuracy, which verifies the reliability of the modeling process.

• 出版日期2017-1
• 单位武汉理工大学