Monitoring of L-Shape Bolted Joint Tightness Using Thermal Contact Resistance

作者：Jalalpour M; Kim J J^*; Taha M M Reda

来源：Experimental Mechanics, 2013, 53(9): 1531-1543.

DOI：10.1007/s11340-013-9759-9

• Structural health monitoring (SHM)
• Thermal contact resistance
• Contact pressure
• L-shape bolted joint
• Joint tightness

In this paper, we describe the possible use of hermal contact resistance measured under ambient conditions as a non-destructive feature to monitor L-shape bolted joints. We demonstrate that thermal contact resistance can be correlated to the contact pressure of L-shape bolted joints and thus can be used to infer joint tightness. Five different torque levels of bolt tightness in an L-shape bolted joint were measured for contact pressure and thermal contact resistance using Fuji PrescaleA (R) pressure-sensitive film and a test setup in ambient conditions. Using probabilistic analysis, probability density functions (PDFs) and intervals developed from the PDFs, the contact pressure and thermal contact resistance were developed and correlated. By examining the intervals of the contact pressure and thermal contact resistance at each torque level, it was concluded that thermal contact resistance measured under ambient conditions can be used to describe bolted joint tightness.

• 出版日期2013-11