A modification of Smith-Watson-Topper damage parameter for fatigue life prediction under non-proportional loading

作者：Li, J.; Liu, J.; Sun, Q.; Zhang, Z. -P.; Qiao, Y. -J.

来源：Fatigue and Fracture of Engineering Materials and Structures, 2012, 35(4): 301-316.

DOI：10.1111/j.1460-2695.2011.01620.x

• fatigue life prediction
• multiaxial fatigue
• non-proportional loading
• strain energy density

In this paper, the shortcomings of the SmithWatsonTopper (SWT) damage parameter are analysed on the basis of the critical plane concept. It is found that the SWT model usually overestimates the fatigue lives of materials since it only takes into account the fatigue damage caused by the tensile components. To solve this problem, Chen et al. (CXH) modified the SWT model through considering the shear components. However, there are at least two problems present in CXH model: (1) the mean stress is not considered and (2) the different influence of the normal and shear components on fatigue life is not included. Besides, experimental validations show that the modification by Chen et al. usually leads to conservative fatigue life predictions during non-proportional loading. In order to overcome the shortcomings of SWT and CXH models, a damage parameter as the effective strain energy density (ESED) is proposed. Experimental validations by using eight kinds of materials show that the ESED model can give satisfactory fatigue life predictions under the non-proportional loading.

• 出版日期2012-4
• 单位中国人民解放军空军工程大学