Accuracy assessment of GPS/Acoustic positioning using a Seafloor Acoustic Transponder System

作者：Chen, Hsin Hung^*; Wang, Chau Chang

来源：Ocean Engineering, 2011, 38(13): 1472-1479.

DOI：10.1016/j.oceaneng.2011.07.002

• GPS/Acoustic geodesy
• Crustal deformation
• Seafloor transponder
• Slant range residual

The accuracy of GPS/Acoustic positioning is crucial for monitoring seafloor crustal deformation. However, the slant range residual is currently the only indicator used to evaluate the precision of positioning seafloor transponders. This study employs a unique Seafloor Acoustic Transponder System (SATS) to evaluate the accuracy of GPS/Acoustic seafloor positioning. The SATS has three transponders and an attitude sensor in a single unit, which provides true lengths of transponder baselines and true attitude of the SATS to ensure assessment reliability and validity. The proposed approach was tested through a GPS/Acoustic experiment, in which an off-the-shelf acoustic system was used to collect range measurements. Using GPS/Acoustic geodetic observations, the positions of three transponders on the SATS were estimated by an optimization technique combined with ray-tracing calculations. The accuracy of the GPS/Acoustic seafloor positioning is assessed by comparing the true baselines and attitude with the results derived from the position estimates of the three transponders. A sensitivity analysis is conducted to investigate the robustness of the GPS/Acoustic positioning results to changes of sound speed. Experimental results demonstrate that the use of the SATS can help to assess the validity of the GPS and acoustic travel time measurements in the GPS/Acoustic seafloor positioning.

• 出版日期2011-9
• 单位中山大学