科研之友
微信
新浪微博
Facebook
分享链接
摘要
A detailed analysis of the effective thermal resistance for the bump foil of air foil bearings (AFBs) is performed. The presented model puts emphasis on the thermal contact resistances between the bump foil and the top foil as well as between the bump foil and the base plate. It is demonstrated that most of the dissipated heat in the lubricating air film of an air foil bearing is not conducted by microcontacts in the contact regions. Instead, the air gaps close to the contact area are found to be thin enough in order to effectively conduct the heat from the top foil into the bump foil. On the basis of these findings, an analytical formula is developed for the effective thermal resistance of a half bump arc. The formula accounts for the geometry of the bump foil as well as for the surface roughness of the top foil, the bump foil, and the base plate. The predictions of the presented model are shown to be in good agreement with measurements from the literature. In particular, the model predicts the effective thermal resistance to be almost independent of the applied pressure. This is a major characteristic property that has been found by measurements but could not be reproduced by previously published models. The presented formula contributes to an accurate thermohydrodynamic (THD) modeling of AFBs.
- 出版日期2017-11
