摘要

From the measured data, the impact of the rapid thermal process (RTP) and laser spike anneal (LSA) sequence on negative bias temperature instability (NBTI) and current gain was investigated on 40-nm complementary metal-oxide semiconductor technology. For the conventional sequence RTP/LSA, a significant threshold voltage V(T) shift is observed due to the NBTI. The thermal gradient in the LSA step induces a thermomechanical stress inducing oxide fixed charges and an increase in Si dangling bonds at the SiON/Si interface, thus increasing the V(T) shift. By moving the LSA step to before the RTP anneal and coimplanting a carbon atom in the source/drain extension implant processing, the obvious V(T) shift could be suppressed to the same as the RTP-only anneal. Best of all, the sequence change does not impact the gain of the original combination anneal over the RTP-only anneal in the on current of devices.

  • 出版日期2011-3

全文