Adhesively bonded joints composed of pultruded adherends: Considerations at the upper tail of the material strength statistical distribution

作者：Vallee Till^*; Keller Thomas; Fourestey Gilles; Fournier Benjamin; Correia Joao R

来源：Probabilistic Engineering Mechanics, 2009, 24(3): 358-366.

DOI：10.1016/j.probengmech.2008.10.001

• Adhesive joints
• Modeling
• Strength
• Failure criterion
• Probabilistic methods

The Weibull distribution, used to describe the scaling of strength of materials, has been verified on a wide range of materials and geometries: however, the quality of the fitting tended to be less good towards the upper tail. Based on a previously developed probabilistic strength prediction method for adhesively bonded joints composed of pultruded glass fiber-reinforced polymer (GFRP) adherends, where it was verified that a two-parameter Weibull probabilistic distribution was not able to model accurately the upper tail of a material strength distribution, different improved probabilistic distributions were compared to enhance the quality of strength predictions. The following probabilistic distributions were examined: a two-parameter Weibull (as a reference), m-fold Weibull, a Grafted Distribution, a Birnbaum-Saunders Distribution and a Generalized Lambda Distribution. The Generalized Lambda Distribution turned out to be the best analytical approximation for the strength data, providing a good fit to the experimental data, and leading to more accurate joint strength predictions than the original two-parameter Weibull distribution. It was found that a proper modeling of the upper tail leads to a noticeable increase of the quality of the predictions.

• 出版日期2009-7
• 单位中国地震局