A numerical study of gypsum plasterboard behaviour under standard and natural fire conditions

作者：Hopkin D J^*; Lennon T; El Rimawi J; Silberschmidt V V

来源：Fire and Materials, 2012, 36(2): 107-126.

DOI：10.1002/fam.1092

• gypsum plasterboard
• timber
• fire
• structural fire engineering

Gypsum plasterboards are the most widely used passive fire protection for timber structures, especially in the case of light timber frame construction. Understanding the complex thermo-physical behaviour of plasterboard at elevated temperature is vital in the performance-based design of any structure adopting gypsum as passive fire protection (PFP). Numerous heat transfer studies have been conducted over the years where attempts have been made to simulate the fire performance of gypsum-protected assemblies, subject to standard fire exposure. However, contradictory thermal properties for gypsum plasterboard are apparent throughout. As a result, it is unclear from a practitioner%26apos;s perspective as to which studies represent reasonable properties for design purposes. In recognition of this the authors present a numerical study highlighting the consequences of adopting many of the differing property sets available in the literature, the sensitivity of temperature development resulting from deviations from the assumptions that underpin such properties, and the consequences of adopting plasterboard properties derived from standard fire tests, in natural fire situations. The study presents heat transfer simulations conducted using the finite element software TNO DIANA coupled with both laboratory and natural fire tests conducted on Structural Insulated Panels (SIPs) and Engineered Floor Joists (EFJs). %26lt;br%26gt;It is found from this study that plasterboard properties are highly sensitive to the assumed free and chemically bound moisture contents. Minor percentage changes are shown to have a significant influence on the temperature development of SIPs exposed to standard furnace fires, while some of the most accepted plasterboard properties available in the literature are found, in some cases, to be non-conservative when adopted in simulations of SIPs. More interestingly, it is also found that the properties of plasterboard available in the literature, largely derived from standard fire tests, are not independent of the heating rate. As a result, when such properties are applied to natural fire problems significant inaccuracies can occur.

• 出版日期2012-3