Application of kaolin-Fe3O4 nano-composite for the removal of azo dye from aqueous solutions

作者：Mohagheghian Azita; Pourmohseni Melina; Vahidi Kolur Robabeh; Yang Jae Kyu; Shirzad Siboni Mehdi^*

来源：Desalination and Water Treatment, 2017, 58: 308-319.

DOI：10.5004/dwt.2017.0198

• Nanoparticles
• Kaolin-Fe3O4
• Kinetic and Isotherm models
• Thermodynamics, Adsorption
• Acid Red 14

Kaolin-Fe3O4 nanoparticles synthesized by co-precipitation and hydrothermal methods was used to remove Acid Red 14 (AR14) from aqueous solutions at various pH, dye concentrations, adsorbent dosages, temperatures and ionic strength. Efficient coating of Fe3O4 nanoparticles onto Kaolin was identified by FT-IR, XRD, SEM, EDX and VSM analysis. Removal efficiency of AR14 by Kaolin-Fe3O4 nanoparticles was greater than that by Kaolin-alone and Fe3O4-alone. Maximum adsorption was obtained at pH 3. The removal efficiency was increased with increasing adsorbent dosage, but was decreased with increasing initial AR14 concentration and temperature. Removal efficiency of AR14 decreased in the presence of four selected anions. Adsorption kinetic was well described by pseudo-second order model. Adsorption isotherm was well described by the Langmuir equation. Maximum adsorption capacity was 94.34 mg/g. Thermodynamic studies indicated adsorption of AR14 onto kaolin-Fe3O4 nanoparticles through an exothermic process. Adsorption activity of AR14 by kaolinFe(3)O(4) nanoparticles was maintained even after six successive cycles. Kaolin-Fe3O4 can be used for the treatment of aqueous solutions containing dyes as an efficient adsorbent and can be easily separated from solution by magnet after reaction.

• 出版日期2017-1