A Novel Method of Measuring Moisture Content Distribution in Timber During Drying Using CT Scanning and Image Processing Techniques

作者：Watanabe Ken^*; Lazarescu Ciprian; Shida Satoshi; Avramidis Stavros

来源：Drying Technology, 2012, 30(3): 256-262.

DOI：10.1080/07373937.2011.634977

• CT scanning
• Image processing technique
• Moisture content
• Shrinkage
• Timber drying

A new method for the nondestructive measurement of moisture content (MC) distribution in timber during drying was developed using X-ray computed tomography (CT) scanning and image processing techniques. The deformed cross section in the CT images due to shrinkage was corrected with the image registration, and the shrinkage was measured by digital image correlation analysis. The pixel-wise MC distributions during drying were measured and visualized successfully. The total timber MC estimated from the MC values of each pixel were strongly correlated with those measured by calculation without geometrical transformation of CT images. The coefficient of determination (R-2) and the standard error of prediction (SEP) were 0.99 and 0.18%, respectively, within the MC range of 19.2-47.3%. In addition, the measured shrinkage distribution during drying was in accordance with the diamonding deformation observed. The results suggest that CT scanning combined with image processing techniques is an effective tool for nondestructive assessment of MC distribution during drying.