Activation energy for dibenzofuran desorption from Fe3+/TiO2 and Ce3+/TiO2 photocatalysts coated onto glass fibres

作者：Xia QB; Li Z^*; Xi HX; Xu KF

来源：Adsorption Science and Technology, 2005, 23(5): 357-366.

DOI：10.1260/026361705774355469

• Dibenzofuran
• Dibenzofuran desorption
• Photocatalytic films

In this work, TiO2, Fe3+/TiO2 and Ce3+/TiO2 photocatalytic films were respectively immobilized on glass fibres via the sol-gel technique to prepare supported photocatalysts. Temperature programmed desorption (TPD) experiments were conducted to measure the TPD curves for the removal of dibenzofuran from these photocatalysts, from which the activation energy for dibenzofuran desorption from the photocatalyst surfaces was estimated.
The results showed that the activation energies for dibenzofuran desorption from the photocatalysts TiO2, Ce3+/TiO2 and Fe3+/TiO2 coated separately onto the glass fibres were 16.41 kJ/mol, 22.55 kJ/mol and 33.59 kJ/mol, respectively, while the hardness values of the ions Fe3+, Ce3+ and Ti4+ were respectively 13.1 eV, 11.9 eV and 10.6 eV.
The data indicated that the use of Fe3+ or Ce3+ ions for doping a TiO2 photocatalyst increased the local hardness of the doped TiO2 photocatalyst surface. This, in turn, increased the activation energy for the desorption of dibenzofuran from such a TiO2 photocatalyst surface.

• 出版日期2005
• 单位华南理工大学